USR3510 Courier® M2M CDMA/GSM 3G Cellular Gateway with GPS

Quick Start Guide (PDF) User Guide (PDF) Excessive Data Usage Warning (PDF) Data Sheet (PDF) USR803510 Declaration of Conformity (PDF) MOLEX Drawing (PDF) MOLEX Datasheet (PDF) Main Board (PDF) Connection Persistence (PDF) Mounting Plan (PDF) Front Plate STP File (ZIP) 3D STP File (ZIP)

Excessive Data Warning How to install a SIM Card How to Connect to a GSM Cellular Network Activating AT&T Cellular Service with Telit How to Connect to a CDMA Cellular Network Introduction to the USR Universe Provisioning Server Radio Firmware Update

Radio Firmware Update Version 03-04-2015

1. Download the following file to a temporary location on your computer's hard drive.

2. Extract the contents of the original zip file.

3. Do NOT extract the contents of the 5 individual zip files.

4. Open the Gateway's embedded Graphical User Interface (GUI) and upload the radio firmware to the Gateway.

   1. In a web browser, go to 192.168.1.1

   2. At the login screen, enter the default username admin and password admin .

   3. Choose the Provisioning tab.

   4. Select Upload device provisioning file.

   5. Click the Choose File button.

   6. Navigate to the folder where the zip files are located, and choose any of the 5 files with the .zip suffix .

   7. Click the Upload button.

   8. The Gateway will then load the firmware and ask permission to restart. Click Cancel for the first 4 uploaded files.

   9. Repeat steps e through h , choosing the next zip file, until all 5 files are uploaded.

   10. The Gateway will then load the firmware and ask permission to restart. Click Restart.

Radio_Firmware-03-04-2015.zip (54.8 MB 12/10/2015)