This page has been designed for printability. To print this document, click the Print button on your browser's toolbar. When you are finished, click the Close Window button located at the upper-right or bottom of the page to close this window and return to the previous page.



RESET Button: Press the reset button located on the back of the Secure Storage Router Pro. The PWR LED will turn red, the WAN LED will blink, and the USB1, USB2, and 1394 LEDs will turn on and off in sequence. When the USB1, USB2, and 1394 LEDs are all green, release the Reset button. This will reset the Secure Storage Router Pro to the factory default settings.

Was this FAQ helpful? (1 = not helpful, 5 = very helpful)
1   2   3   4   5  
 
Did it resolve your problem?
Yes Yes   No   Not sure (haven't tried it yet)  
 
Additional Comments (255 characters maximum)

Close Window