Verify your product
Is this your access point? Verify that the label on the bottom of the access point looks like the image below. This product is not a router, if you have a router check the USR8054 page.
|Manuals and other Documents|
Product is operating system Independent and is compatible with all current Windows, Macintosh, and Linux operating systems
|Released Firmware and Configuration Utility|
Warning: Verify your product is the USR5450 Wireless Turbo Multi-Function Access Point before upgrading. This will NOT work with the Wireless Turbo Router USR8054.|
Note: It is critical that the AP have a valid IP Address before trying to update the firmware. Since the update process uses TFTP, a valid network IP Address is required. 0.0.0.0 is not a valid IP address.
125 Mbps Upgrade|
Firmware Update - Version 1.53b10
Note: Previous configuration utilities cannot be used with firmware version 1.53b10. After upgrading the firmware, it is necessary to uninstall your previous configuration utility and install the latest Configuration Utility Version 1.53b7.
Note: If you are upgrading from version 1.41, your access point will retain its custom settings. Backup settings files from 1.41 firmware cannot be used to restore your settings after you have upgraded the firmware. It is recommended that you save your custom settings to a file after upgrading.
Note: If you are upgrading from version 1.31 or older, your access point will reset to the factory default settings. Previous backup settings files from older firmware cannot be used to restore your settings. It is recommended to write down all of your custom settings before upgrading. After upgrading your firmware, reconfigure your Access Point, and then save your custom settings to a file.
||02-23-05||Configuration Utility - Version v1.53b7|
Note: This utility can only be used in conjunction with firmware 1.53b10.
||01-05-05||Archive||Firmware Update - Version 1.41|
Note: Previous configuration utilities cannot be used with firmware version 1.41. After upgrading the firmware, it is necessary to uninstall your previous configuration utility and install the latest Configuration Utility Version v1.42b1.
Note: Upgrading to version 1.41 below will reset your access point to the factory default settings, including your password. Previous backup settings files from older firmware cannot be used to restore your settings. It is recommended to write down all of your custom settings before upgrading.
||04-22-04||Configuration Utility - Version v1.42b1|
Note: This utility can only be used in conjunction with firmware 1.41.
||04-07-04||Note: Firmware versions 1.19 and 1.31 require the use of configuration utility 4.01E.
||Firmware Update version 1.31|
Note: This firmware update provides support for the following Advanced Modes - AP Client, Bridging, Multi-Bridging, and Repeater.
||09-30-03||Original Firmware version 1.19||firmware_upgrade_procedure.txt
Configuration Utility - Version USR04_4.01E||utility_upgrade_procedure.txt