I am unable to establish a wireless connection from the Wireless MAXg Bridge to my wireless router or access point.

Possible Solution:

If you are using Bridge mode, be certain that your wireless router or access point supports WDS. If it does not, you will not be able to use Bridge mode to establish a wireless connection with the Wireless MAXg Bridge. You can still use Infrastructure mode or Ad hoc mode without WDS.

Possible Solution:

If MAC filtering is enabled in your wireless router or access point, make sure the WLAN MAC address of the Bridge is entered into the accepted list so that it is not filtered out.

Possible Solution:

Be certain that you are using the same Network Name (SSID), channel, and security information as the settings for your existing wireless network.

Possible Solution:

You may be experiencing some wireless interference. Be certain that the Bridge is set to the same channel as your wireless router or access point. To reduce any potential interference, change the channel. Make sure you set all these network devices to the same channel.

Return to Troubleshooting page