The USRobotics Wireless Router allows multiple users to wirelessly access your network or Internet connection. Delivering wireless speeds up to 54 Mbps, this router has wireless encryption and filtering options, as well as an SPI firewall. The Wireless Router supports up to 253 Ethernet devices (with additional hubs/switches) and is completely compatible with all 802.11g and 802.11b products.
The USRobotics Wireless Router lets you share your network or Internet access over secured 54 Mbps wireless and 10/100 Mbps Ethernet connections. Wireless 64/128-bit WEP and WPA/WPA2 encryption ensure wireless security for up to 253 users. Network security is provided by the router’s stateful packet inspection firewall and MAC address filtering.
The wireless router has the following status LEDs:
| Symbol | Name | State | Condition |
|---|---|---|---|
 |
Power | Off | Not receiving power. |
| On | Receiving power. | ||
 |
WLAN | Off | Not connected to WLAN. |
| Solid | WLAN link is achieved. | ||
| Flashing | Sending or receiving WLAN data. | ||
 |
WAN | Off | Not connected to WAN. |
| Solid | WAN link is achieved. | ||
| Flashing | Sending or receiving WAN data. | ||
 |
LAN | Off | Not connected to LAN. |
| Solid | Ethernet LAN link is achieved. | ||
| Flashing | Sending or receiving LAN data. |
The back of the wireless router has the following connectors:
On the bottom of the router is a reset button:
To reset the router to its factory settings, press in and hold the reset button for 20 seconds.