-------------- CHANGE HISTORY -------------- 2001/10/08 Version 1.25 - Add "MAC Address Control" feature. It enables you 1) MAC level Access Control 2) Assign the mapping between MAC and IP address for the DHCP server - Add a feature to send Wake-on-LAN frame from LAN or WAN side. - Allow user to edit the MAC Address of the WAN port. - Solve incompatible issue with ETHome Cable. - Enlarge timeout for print server to solve some printing problems. - Fix a potential security hole: system password can be snooped at the IE History folder. - Virtual Server now supports port range. For example, you can configure a Virtual Server for ports 2000-2999. 2001/09/12 Version 1.24 - Support UDP traceroute. - Fix reconnect problem of PPTP WAN type. 2001/08/06 Version 1.23 - Change help text for PPTP. 2001/07/30 Version 1.22 - Solve disconnection problem of PPTP WAN type. 2001/07/18 Version 1.21 - Fix reconnection bugs of PPTP WAN type. 2001/07/12 Version 1.20 - Support a new WAN type: PPTP. - Support IP Fragment pass through. - Fix a bug of IPsec pass-through handling that causes key exchanging problems. - Solve the TCP session timeout problem of ssh (port 22) and telnet (port 23). - Support the following applications: . ICQ Phone . Net2Phone . MSN Messenger voice communications and file transfer You have to configure the PC to be the DMZ host. - Fix a bug of NetMeeting handling. You have to configure the PC to be the DMZ host. - Add a firewall feature to block port ranges for DMZ host. Just enable a "Special Application" with null trigger, all ports listed in INCOMING PORTS will be blocked out even DMZ host is enabled. The following setting is recommended when you enable DMZ host: Trigger = [ ], Incoming Ports = [ 1-1023 ] Note: the above setting will not affect the function of Virtual Server. - Support absolute timestamp on system log. - Support 3Com HomeConnect Dual Link ADSL Modem which uses non-standard PPPoE protocol. 2001/02/27 Version 1.00 - First release