Assistenza


Questa pagina č predisposta per la stampa. Per stampare questo documento, clicca sul tasto stampa della barra del tuo browser. Al termine, clicca sul tasto chiudi, situato in alto a destra o in fondo alla pagina, per chiudere la finestra e tornare alla pagina precedente.



RESET Button: Press the reset button located on the back of the Secure Storage Router Pro. The PWR LED will turn red, the WAN LED will blink, and the USB1, USB2, and 1394 LEDs will turn on and off in sequence. When the USB1, USB2, and 1394 LEDs are all green, release the Reset button. This will reset the Secure Storage Router Pro to the factory default settings.


Queste FAQ (Domande Frequenti) ti sono state d’aiuto? (1 = nessun aiuto, 5 = grande aiuto)
1   2   3   4   5  
 
Ti hanno permesso di risolvere il problema?
Si   No   Non so (non ho ancora provato)  
 
Commento facoltativo (255 caratteri al massimo)

Chiudi finestra