Assistenza


Questa pagina č predisposta per la stampa. Per stampare questo documento, clicca sul tasto stampa della barra del tuo browser. Al termine, clicca sul tasto chiudi, situato in alto a destra o in fondo alla pagina, per chiudere la finestra e tornare alla pagina precedente.

Frequently Asked Questions

Question: What is the default login password for my Broadband Router?

Answer:

The default login password for the Broadband router Model 8000 is admin.

If you have previously changed this password and have forgotten it, you will need to reset the Broadband Router to its original factory settings. For information on how to rest your Broadband Router, click here.

Question: What can I do if the broadband router can't obtain an IP address from my ISP?

Answer:

  1. Make sure that your broadband modem, analog modem, or ISDN modem is connected properly.
  2. Try unplugging then plugging back in your cable or DSL modem in order to reset it.
  3. If you are using dynamic IP addressing, make sure that your cable or DSL modem is DHCP-capable.
  4. Some ISPs require that you use a registered MAC address.

Question: What can I do if the specified installation procedure did not work?

Answer:

  1. Try unplugging then plugging in your cable or DSL modem in order to reset it.
  2. Restore the factory default settings of the broadband router by holding in the reset button for at least 3 seconds.

Question: What type of cable do I need to use to connect my broadband modem to the broadband router?

Answer:

Some types of broadband modems require that you use a cross-over cable to connect to the broadband router. Contact your ISP to determine which type of cable you must use.

Question: How do I access the Configuration Utility if I am using a Macintosh?

Answer:

Macintosh users can access the Configuration Utility in the same manner as Windows users. Launch your Internet browser and enter the default IP address, http://192.168.123.254.

Question: Does the broadband router support IPSEC?

Answer:

Yes, the broadband router does support IPSEC.

Question: What is the Reset Button used for on my Broadband Router?

Answer:

The Reset button is used to restore the factory default settings for the Broadband Router.

Question: How do I use the Reset Button on my Broadband Router?

Answer:

Begin by unplugging the power cord. Hold the Reset button in and then plug the power cord back in. Hold the Reset button in for five seconds. The broadband router should now be reset. If it is not, repeat this procedure. Any custom settings you have made to your Broadband Router will be removed.

If you have reached this page from the Broadband Router Troubleshooting page and wish to return, click here.

Question: What type of firewall is the Broadband Router equipped with?

Answer:

The Broadband Router uses NAT and TCP/IP port inspections.

Question: What is NAT?

Answer:

Network Address Translation (NAT) translates multiple IP addresses on the private LAN to one public address that is sent out to the Internet. This provides security since the IP address of a computer on the LAN is not transmitted to the Internet. The user can have multiple private addresses behind the single address that was provided by the ISP.

Question: What is DMZ?

Answer:

DMZ stands for Demilitarized Zone. This feature allows one IP Address to be exposed to the Internet. DMZ allows only one computer to be exposed when multiple TCP/IP ports need to be open. If you want to use DMZ, you must set computer with a static IP.

Question: If DMZ is used, does the exposed user share the public IP with the Broadband Router?

Answer:

No, all specific requests are forwarded to the DMZ host.

Question: What should I do if I am unable to access my email or the web page of my ISP?

Answer:

You should contact your ISP to get the full URL and then perform the following steps:

  1. Connect your broadband modem directly to one of your computers.
  2. Perform the ping command by clicking Windows Start and then Run. In the Run dialog box, Windows 95, 98, and Me users should type command. Windows 2000 and NT users should type cmd. All users should then enter the following command: ping xxx, where xxx is the complete URL for your ISP.
  3. After you get the IP Address, enter the IP address on the mail server option or the Internet browser.

Question: Why can't I access the Configuration Utility?

Answer:

You may have to remove the proxy settings or the dial-up settings on your Internet browser.

Question: Are PPTP packets passed through or actively routed by the Broadband Router?

Answer:

PPTP packets are allowed to pass through by the Broadband Router.

Question: What is the maximum number of users that the Broadband Router will allow?

Answer:

If you attach additional hubs to the Broadband Router, up to 253 separate users can connect to the Broadband Router.

Question: Is the Broadband Router compatible across different platforms?

Answer:

Any platform that supports Ethernet & TCP/IP is compatible with the broadband router.

Question: Will the Broadband Router allow you to use your own public IPs and Domain or do you have to use the IPs provided by the Broadband Router?

Answer:

The Broadband Router mode allows for customization of your public IPs and Domain.

Question: How many ports can be forwarded at the same time?

Answer:

You can forward 12 ports at the same time.

Question: Can the Broadband Router be used in place of a modem?

Answer:

No, the Broadband Router must be used with a broadband modem, an analog modem, or an ISDN modem.

Question: What are the advanced features?

Answer:

The advanced features of the Broadband Router include Dynamic Routing, Static Routing, DMZ Host, Port filters, Port forwarding, and Port pass-through.

Question: How big is the memory buffer in the broadband router?

Answer:

512 Kilobytes.

Question: Is there a syslog feature for the broadband router?

Answer:

There is a system log in the Toolbox section of the Configuration Utility.

Question: How can I determine if I have static or DHCP(dynamic) IP addresses?

Answer:

You can check in the Status section of the Configuration Utility or you can contact your ISP for this information.


Queste FAQ (Domande Frequenti) ti sono state d’aiuto? (1 = nessun aiuto, 5 = grande aiuto)
1   2   3   4   5  
 
Ti hanno permesso di risolvere il problema?
Si   No   Non so (non ho ancora provato)  
 
Commento facoltativo (255 caratteri al massimo)

Chiudi finestra