Assistenza
Questa pagina č predisposta per la stampa. Per stampare questo documento, clicca sul tasto stampa della barra del tuo browser. Al termine, clicca sul tasto chiudi, situato in alto a destra o in fondo alla pagina, per chiudere la finestra e tornare alla pagina precedente.
|
Installation Guide for Wireless Access Point This guide should be used to verify that all essential components are installed to configure your USRobotics Wireless Access Point. Please use this checklist to verify that all required Hardware, Software, and Configuration Settings are correct to ensure a successful setup. NOTE: It is important that all components of your network device(s) are installed and functioning correctly. Please take the time to verify all of the items listed below. Not doing so may result in no network connectivity. There are two ways to Configure your Access Point:
If there is a step that you are unsure of, click on the (more information) link to see some specific information on how to accomplish the task. Select the method to configure your Wireless Access Point:Connect to the Access Point via Ethernet. (11 steps) Connect to the Access Point via Wireless. (12 steps) |