Soporte


This page has been designed for printability. To print this document, click the Print button on your browser's toolbar. When you are finished, click the Close Window button located at the upper-right or bottom of the page to close this window and return to the previous page.


I can't access the Internet.

Possible Solution:

  • Make sure that you've connected the power cord.
  • Make sure that you've correctly connected Ethernet or USB cables between the router and PCs.
  • Make sure that you have a DSL link.
  • Make sure that you have an active ISP account.
  • See the router's Service Provider Setting Page under WAN Setup. Check your settings for VCI and VPI.
  • See the router's Service Provider Setting Page under WAN Setup. Check your settings for username and password.
  • If you can't access the Internet, refer to the Troubleshooting Ping Procedure in the FAQ section of the USR9003 support page.

Was this FAQ helpful? (1 = not helpful, 5 = very helpful)
1   2   3   4   5  
 
Did it resolve your problem?
Yes Si   No   Not sure (haven't tried it yet)  
 
Additional Comments (255 characters maximum)

Close Window