This page has been designed for printability. To print this document, click the Print button on your browser's toolbar. When you are finished, click the Close Window button located at the upper-right or bottom of the page to close this window and return to the previous page.
I cannot print to a network printer attached to my gateway in Windows Vista, XP or 2000.
Ensure that your printer is installed correctly and powered on.
Check that your printer has sufficient ink and paper. A printer connected to the print server cannot send its status to your computer.
Reboot the gateway by unplugging the power cord. Wait at least 30 seconds before plugging it in again. This will clear the print queue of any pending documents.
Make sure that you’ve entered the Printer location URL address correctly (The URL information is case-sensitive and must be entered exactly as it is listed on the Printer Server page from the Device menu).
Make sure that your PC firewall is configured to trust your Local Area Network (LAN) or disabled.
Printers attached to the product must be non-host-based and must be installed with drivers that support a Page Descriptor Language (PDL) such as PostScript or PCL. Check the website for your printer manufacturer to see if they have drivers available that support a PDL.
Note: Windows Vista Users must have administrative privledges on their machine to peform these steps.