Soporte


This page has been designed for printability. To print this document, click the Print button on your browser's toolbar. When you are finished, click the Close Window button located at the upper-right or bottom of the page to close this window and return to the previous page.

Broadband Router User Guide (Windows 95, 98, 2000, NT, Me, XP, and Macintosh)

Frequently Asked Questions

Question: What is the default login password for my Broadband Router 8000A?

Answer:

There is no default password for the Broadband Router 8000A. When you first log-in to the Configuration Utility, you will be prompted to set a password. If you choose not to set a password at this time, you can set one or change your current one at any time by clicking Change Password within the Setup option. The password restricts who can access the configuration options of this utility.

Note: If at any time you forget your password, you can press the Reset button on the front of the Broadband Router 8000A for three to five seconds in order to restore the factory default settings. For more information, click here.

Question: What can I do if the Broadband Router can't obtain an IP address from my ISP?

Answer:

  1. Make sure that your broadband modem, analog modem, or ISDN modem is connected properly.
  2. Try unplugging then plugging back in your cable or DSL modem in order to reset it.
  3. If you are using dynamic IP addressing, make sure that your cable or DSL modem is DHCP-capable.
  4. Some ISPs require that you use a registered MAC address.
Question: What can I do if the specified installation procedure did not work?

Answer:

  1. Try unplugging then plugging in your cable or DSL modem in order to reset it.
  2. Restore the factory default settings of the Broadband Router by holding in the reset button for at least 3 seconds.

Question: What type of cable do I need to use to connect my broadband modem to the Broadband Router?

Answer:

Some types of broadband modems require that you use a cross-over cable to connect to the Broadband Router. Use the cables that were included with your Broadband Router and with your modem. Contact your ISP if you are still uncertain about which type of cable you must use.

Question: How do I access the Configuration Utility?

Answer:

Launch your Internet browser and enter the default IP address, http://192.168.123.254.

Question: Does the Broadband Router support IPSEC?

Answer:

The Broadband Router supports IPSEC pass-through.

Question: What type of firewall is the Broadband Router equipped with?

Answer:

A: The Broadband Router uses NAT and TCP/IP port inspections.

Question: What is NAT?

Answer:

Network Address Translation (NAT) translates multiple IP addresses on the private LAN to one public address that is sent out to the Internet. This provides security since the IP address of a computer on the LAN is not transmitted to the Internet. The user can have multiple private addresses behind the single address that was provided by the ISP.

Question: What is DMZ?

Answer:

DMZ stands for Demilitarized Zone. This feature allows one IP Address to be exposed to the Internet. DMZ allows only one computer to be exposed when multiple TCP/IP ports need to be open. If you want to use DMZ, you must set computer with a static IP.

Question: If DMZ is used, does the exposed user share the public IP with the Broadband Router?

Answer:

No, all specific requests are forwarded to the DMZ host.

Question: What should I do if I am unable to access my email or the web page of my ISP?

Answer:

You should contact your ISP to get the full URL and then perform the following steps:

  1. Connect your broadband modem directly to one of your computers.
  2. Perform the ping command by clicking Windows Start and then Run. In the Run dialog box, Windows 95, 98, and Me users should type command. Windows 2000, NT, and XP users should type cmd. All users should then enter the following command: ping xxx, where xxx is the complete URL for your ISP.
  3. After you get the IP Address, enter the IP address on the mail server option or the Internet browser.

Question: Why can't I access the Configuration Utility?

Answer:

You may have to remove the proxy settings or the dial-up settings on your Internet browser.

Question: Are PPTP packets passed through or actively routed by the Broadband Router?

Answer:

PPTP packets are allowed to pass through by the Broadband Router.

Question: What is the maximum number of users that the Broadband Router will allow?

Answer:

If you attach additional hubs to the Broadband Router, up to 253 separate users can connect to the Broadband Router.

Question: Is the Broadband Router compatible across different platforms?

Answer:

Any platform that supports Ethernet & TCP/IP is compatible with the Broadband Router.

Question: Will the Broadband Router allow you to use your own public IPs and Domain or do you have to use the IPs provided by the Broadband Router?

Answer:

The Broadband Router mode allows for customization of your public IPs and Domain.

Question: How many ports can be forwarded at the same time?

Answer:

You can forward 20 ports at the same time.

Question: Can the Broadband Router be used in place of a modem?

Answer:

No, the Broadband Router must be used with a broadband modem, an analog modem, or an ISDN modem.

Question: What are the Advanced Settings?

Answer:

The advanced features of the Broadband Router include Firewall, NAT, Special Application, Virtual DMZ Host, Remote Management, and Client Filtering.

Question: Is there a security log feature for the Broadband Router?

Answer:

Yes, there is a security log feature in the Status page of the Configuration Utility.

 

Was this FAQ helpful? (1 = not helpful, 5 = very helpful)
1   2   3   4   5  
 
Did it resolve your problem?
Yes Si   No   Not sure (haven't tried it yet)  
 
Additional Comments (255 characters maximum)

Close Window