How do I disable wireless security on my MAXg Router?
- Launch your Web browser. In the location or address line, type the address of the router's Web User Interface and press Enter.
Note: If you have modified your router's IP address, enter the new IP address instead of 192.168.2.1
- When the user name and password window appears, type in the user name and the password you created. Click OK to load the router's setup page.
Note: You will not be prompted to login the first time you connect to the MAXg Router's Web User Interface. During the Setup Wizard procedure, you will be prompted to create a user name and password to log in to the router. If you create a user name and password, you will need to use these whenever you want to log in to the Wireless MAXg Router. The user name and password are case sensitive.
- Click Security in the main menu.
- In the Wireless section, select None from the drop-down menu labeled Method.
- Click Save to make your changes permament.
Note: Your wireless signal is now unencrypted. This means that anyone with a wireless adapter in range of your router can now use your internet connection and any network resources attached to your router (printers, network drives, etc.)
|