Manuals and other Documents
|USRobotics recommends updating the modem's firmware so you can benefit from the latest performance enhancements and increased stability while enjoying optimal compatibility with you ISP. |
|How to verify your firmware version|
|There are two ways to update your V.92 modem. Select one of the following options:|
|V.92 Update - Version 5.22.91
|Stand alone flasher:|
To update your V.92 modem via the stand alone flasher, simply download the flasher below, run the .exe file, and follow the on-screen instructions.
|Windows 5610 Flasher||312 KB ||08-31-06|
|Linux 5610 Flasher||177 KB ||08-31-06|
|Version 5.22.91 Release Notes||1 KB ||08-26-09|
|Update Utility |
You may use our automated utility to update your modem. Your Installation CD-ROM has ControlCenter or Instant Updte. If you do not have your Installation CD-ROM, you can download ControlCenter or Instant Update below. The utility will guide you through the update process.
|Instant Update||3.6 MB||03-02-07|
|Installation for 32 bit and 64 bit Windows Server 2012, Server 2011, 2008, Windows 8, and Windows 7|
The modem will install using the default driver provided by the operating system.
|WHQL Certified Drivers Version 6.22.70.03 for Windows 95, 98, Me, 2000, XP, XP x64 Edition, Server 2003, Server 2003 x64 Edition, Vista, Vista x64 Edition|
- Download the file to a temporary location on your computer's hard disk drive.
- Double-click the file in Windows Explorer and extract contents to a temporary folder.
- When prompted by Windows, direct the installation to the temporary folder.
|Modem driver for Microsoft DOS version 6.22 or higher.|
| To install this driver, add the line c:\005610\dosmdm.exe to your autoexec.bat file where c:\005610 is the path in which the driver is located.
This is a BETA test file which is not supported by USRobotics. |
|DOSMDM.EXE||4194 bytes ||07/27/2001|
|Red Hat Package Manager|
|USRobotics Corporation is pleased to provide the following Red Hat Package Manager (.rpm) support file. This RPM package has been tested under Red Hat Linux 6.0 and higher. It should also work with other Linux distributions supporting the RPM utility.
Install the RPM file by entering the rpm -i 3ComMdm-1.0-1.i386.rpm command at the command prompt.
This file can also be used as a basis to write your own script for UNIX/LINUX hybrids. If you make your own scripts for a hybrid, it would be appreciated if you could send this script to USRobotics so that we may post it so that others may benefit as well.
This is a BETA test file which is not supported by USRobotics.
|LNUX_3ComMdm-1.0-1.i386.rpm||7987 bytes ||07/27/2001|
|V.92 Update - Version 5.22.70
|5610 Flasher||894 KB ||12-09-03|
|Modem communications application|