Assistenza



Serial Cable Pinouts

Pinout List For RS-232 Serial Cables

Questa pagina č predisposta per la stampa. Per stampare questo documento, clicca sul tasto stampa della barra del tuo browser. Al termine, clicca sul tasto chiudi, situato in alto a destra o in fondo alla pagina, per chiudere la finestra e tornare alla pagina precedente.

DB-25

DB-9

Circuit

Function

-----

AA

Chassis Ground

2

3

BA

Transmitted Data

3

2

BB

Received Data

4

7

CA

Request To Send

5

8

CB

Clear To Send

6

6

CC

Data Set Ready

7

5

AB

Signal Ground

8

1

CF

Carrier Detect

12

-----

SCF

Speed Indicate

20

4

CD

Data Terminal Ready

22

9

CE

Ring Indicate

The Minimum required pins needed for the modem to operate are: Data, Signal Ground and Data Terminal Ready (unless DIP 1 is down).

Also, the sources of the signal are:
1 and 7 are supplied by both the Terminal and the Modem
2,4,20 are supplied by the Terminal
3,5,6,8,12,22 are supplied by the Modem


For a Macintosh 8-pin DIN:

DB-25

Macintosh

2

3

Transmitted Data

3

5

Received Data

4

1

Request To Send

5

2

Clear To Send

7

4

Ground

20

1

Data Terminal Ready

Note: On a Mac, the DTR is tied to the RTS line. This makes it necessary to override DTR(dip 1 down).


Queste FAQ (Domande Frequenti) ti sono state d’aiuto? (1 = nessun aiuto, 5 = grande aiuto)
1   2   3   4   5  
 
Ti hanno permesso di risolvere il problema?
Si   No   Non so (non ho ancora provato)  
 
Commento facoltativo (255 caratteri al massimo)

Chiudi finestra