Support
This page has been designed for printability. To print this document, click the Print button on your browser's toolbar. When you are finished, click the Close Window button located at the upper-right or bottom of the page to close this window and return to the previous page.
|
My PWR LED does not illuminate. Possible solution: Possible solution: Possible solution:
If your USB is enabled, there will be a USB icon and the words Universal serial bus controller under the Computer icon. If USB is not enabled, you will need to enable USB in the system's BIOS. For instructions, check with your computer manufacturer's technical support. Once your USB port has been enabled in your system's BIOS, Windows will automatically detect and install USB support when it restarts. Possible solution: |