USR3516-EMU Courier® Modemulator™ Expansion Card

Expansion Card Installation Guide (PDF) Excessive Data Usage Warning (PDF) Quick Start Guide (PDF) Gateway User Guide (PDF) Modemulator User Guide (PDF) Modemulator GUI User Guide (PDF) Data Sheet (PDF) USR803520 Declaration of Conformity (PDF)

Excessive Data Warning USR Modemulator Teaser Intro to the Modemulator Data Communications System Modemulator Expansion Card Installation Instructional #1- Using Manual Answer or Auto-Answer Instructional #2- Dialing Phone Numbers or IP Addresses Instructional #3- Dial Security Instructional #4- Leased Line Instructional #5- Single-ended Operation Instructional #6- Remote Command Mode Instructional #7- Modemulator Firmware Upgrade Modemulator GUI Overview

Modemulator Windows GUI The Modemulator Graphical User Interface (GUI) is a software application that runs on a computer having a Windows operating system to make configuring and updating Modemulators much faster and easier than using the Modemulator's native command-line interface (CLI).

NOTE: USRobotics is providing this software as-is, and is currently offering only limited support.

1. Download the 3516-emu-GUI.zip file to a temporary location on your computer's hard drive.
2. Extract the contents of the file to a temporary location on your hard drive.
3. Follow the install instructions in the Modemulator GUI User Guide to complete the installation. Modemulator GUI for Windows 3516-emu-GUI.zip (202 KB 04/21/2016)
   
   

Modemulator Update Version 1.0.04 IMPORTANT: Before attempting to flash Modemulator code version 1.0.04 (or later), it is necessary to first flash the boot loader firmware. Once the boot loader has been flashed, any version of firmware can be loaded.

WARNING: Attempting to flash version 1.0.04 into a Modemulator which doesn't have the boot loader will result in the checksum failing, and the Modemulator remaining in boot code containing version 1.0.01. Flashing the boot loader will fix the issue.

1. Download the following files to a temporary location on your computer's hard drive.
2. Do NOT extract the contents of the zip file
3. Refer to instructions in the Modemulator Installation Guide to install the bin file
4. Refer to instructions in the Modemulator Installation Guide to install the zip file
5. Refer to instructions in the Modemulator User Guide to install the boot loader firmware and the 1.0.04 hex file

Modemulator Release Notes (4 KB 05/16/2017) Gateway Firmware required for Modemulation Version 1.46.0.2 (11.0 MB 06/10/2015) Gateway Application Software required for Modemulator (3.2 MB 06/26/2015) Modemulator Expansion Card Boot Loader Firmware (35 KB 09/08/2015) Modemulator Expansion Card Firmware Version 1.0.04 (44 KB 04/28/2017)