PRODUCT SUPPORT

USR8054 802.11g Wireless Turbo Router
(USR808054CAN, USR5452)
pppoeNote to DSL users: If you have a PPPoE connection, you must configure your settings. Refer to the updated User Guide for detailed instructions.

Manuals and other Documents

OS Compatibility

Product is operating system Independent and is compatible with all current Windows, Macintosh, and Linux operating systems

Firmware
Version 1.67b44 (125 Mbps Update)
Note: Upgrading to version 1.67b44 may reset your wireless router to the factory default settings, including your password. We recommend that you write down your configuration settings prior to upgrading, reset the wireless router to defaults, and then re-configure your router after the upgrade. USRobotics is offering this update to improve issues with frequent router resets under certain data traffic conditions.
USR8054_v167b44.zip 608 KB 04-18-05
Version 1.64b34 (125 Mbps Upgrade)
Note: Upgrading to version 1.64b34 below will reset your wireless router to the factory default settings, including your password. USRobotics is offering this 125 Mbps upgrade to enhance connectivity via the following features:
  • WPA and WPA-PSK wireless security modes
  • 125 Mbps frame bursting enhancement
  • Dynamic wireless channel to avoid interference
  • Supports reception of Multicast streaming to LAN clients
  • Improved browser support
  • Improved wireless sensitivity prevents resets in noisy environments
USR8054_v164b34.zip 606 KB 10-01-04
Version 1.21h (100 Mbps)
Download and extract this file to a temporary location on your computer's hard disk drive. Follow the directions in the upgrade.txt file to complete the update.

Note: Upgrading to version 1.21h below will reset your wireless router to the factory default settings, including your password. However, if you receive a The version of setting file is not compatible message, you need to manually restore the router to its original default settings as described here. In addition, flashing your USRobotics 802.11g Wireless Turbo Router with anything other than USRobotics approved firmware will void your warranty.

USR8054_v1.21h.zip 540 KB 03-02-04